Walking Beams 

Build a walking beam trailer using custom made walking beam assembly.

The design allows you to build the trailer any width you want. The beams can accommodate up to 24” diameter tires. The pivot is half way between the spindles and in line with the spindles.

You make up the crossbeam yourself. The cross beam can be 80x40x5mm , or 75 x 50 x 5mm RHS. The walking beam pivots get welded to the cross beam to complete the assembly.

The walking beams are 80 x 40 x 5mm RHS with closed, beveled ends. The pivots are machined 38 cold rolled round bar inside 1 ½" sch 80 pipe or equivalent, fitted with a grease nipple.

What you need to do:

• weld spindles in place. Can be used with Auto type spindles with a 38mm shoulder shaft or purchase our hubs.

• Decide what length the cross beam should be to suit your application and weld it in place making sure the walking beams are parallel.

• build the box

• build and attach the tongue

Price:

• Walking Beam Assembly, without spindles

  • $275.00  incl GST, shipping not included

• Walking Beam Assembly, with 5 bolt trailer spindles

  • $565.00 incl GST, shipping not included